WASHINGTON — Farmers could soon be on a roll when it comes to preparing their fields for planting.
That’s thanks to rolling machines — developed by Agricultural Research Service scientists in Auburn, Ala., — that can quickly flatten mature, high-biomass cover crops such as rye.
Each roller consists of a long cylinder adorned with a series of evenly spaced, blunt, steel crimping bars, each about one-quarter-inch thick.
As a standard tractor pulls the roller over the field, pressure from the bars flattens and damages the cover crop without cutting or uprooting it.
Within three weeks, the rolled cover crop dries out, forming a mat of dead biomass into which farmers can plant cash crops such as cotton.
The rollers’ design is based on similar machines which have been used in South America for decades.
Since 2001, Agricultural Research Service has been doing research to find the best crimping roller design for southeastern conditions, and benefits from this research are now becoming more widely recognized.
Heads, stalks will roll
The one-pass process has plenty of benefits. It saves money, reduces soil erosion and runoff, helps control weeds, conserves water in the soil and decreases — or eliminates — the need for herbicides.
In the southern U.S. and other regions where water-use efficiency is a concern, cover-crop rollers can also help maximize water storage.
The rolling technology can extend drought resistance by as much as two weeks, help producers manage high-biomass cover crops and facilitate planting in no-till fields.
Tall cover crops
Tall cover crops like rye have many benefits for no-till farming. They prevent erosion, reduce moisture evaporation, limit runoff and increase infiltration and soil water-storage capability.
But planting a cash crop in a sea of unruly cereal grains can be daunting for producers who are new to the task.
The roller simply reduces cover crops to a flat layer of mulch.
A planter, running parallel to the roller’s path, can plant seeds directly into the ground without significantly disturbing the biomass mat.
Reduce herbicide use
Because using a cover crop roller can eliminate the herbicide required to kill a cover crop, it’s an ideal tool for organic farmers or other managers who want to reduce or eliminate herbicide use, according to Chris Lawrence, an agronomist with the USDA Natural Resources Conservation Service.
Lawrence worked with one farmer who rolled his fields before planting no-till certified-organic soybeans, with promising results.
By using the rollers, the farmer was able to eliminate multiple tillage trips and dramatically reduce both tillage costs and erosion risk, compared to his normal clean-till planting practice.
The no-till beans weren’t as tall as a heavily tilled control group, Lawrence said, and had lower yields as a result.
But the reduction in labor and fuel costs led to overall savings.
“After harvest, we estimated the rollers had saved the farmer an average of $50 per acre,” he said.
Crimp my rye
Auburn scientists have made several improvements to the original design, making rollers that are more effective and easier to use.
Agricultural engineer Ted Kornecki and his colleagues compared the impact of three different roller designs.
The first roller has a traditional design, with long, straight, horizontal bars.
The second has diagonal bars that curve around the roller.
The third has a smooth drum attached to a crimping bar that mashes the rye down as the machine moves forward.
Scientists developed and patented the curved-bar roller and have a patent pending on the crimping roller design.
The scientists used each roller to flatten a rye cover crop and measured what percentage of the crimped plants died within three weeks.
The scientists found all three models killed enough rye — 90 percent or more — to enable farmers to begin planting cash crops in the field.
The third roller, which used the crimping bar, yielded the best results.
How it works
The crimper uses a simple drum roller. As the machine rolls over the rye, a crimping bar attached to the drum rapidly pounds the flattened grain, damaging the stalks.
The scientists also found by spraying herbicide on every fourth crimp, they could kill 98 percent of the rye within a week, using 87 percent less Roundup (glyphosate) than would be required to kill non-rolled rye.
The team also examined the smoothness of each design.
One drawback of the first cover-crop roller was excessive vibration, which could damage the tractor to which it’s attached and irritate the people maneuvering it.
The scientists measured the vibrations of the rollers at various speeds and found each model’s vibrations increased with higher operating speeds.
Both the curved-bar and the crimping roller provided smoother rides than the traditional, straight-bar roller, allowing the cover crop to absorb most of the vibrations before they were transferred to the frame of the machine.
Future studies will help scientists maximize the efficiency and comfort of these machines.
Kornecki is also developing new models to address different farming configurations — including one that could be used for crops grown in elevated beds and a lightweight model with two drums.